There is no sound on my Linux box, the device is connected via HDMI cable. What should I do?

Please check the sound level on the TV and the box, check or replace the HDMI cable. Also, check if the problem occurs by playing video from a USB drive. If there is sound, contact Support. If there is no sound during playing a video from the USB drive, please follow the recommendations below:

1. Go to the internal portal / Settings / System Settings / Video / press F1 and select HDMI / DVI - HDMI

2. In Settings / System Settings / Audio / press F1 and select default values:

- Operating Mode – RF Mode

- HDMI Audio – PCM

  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

How to setup IPTV on a MAG device

Step 1: When the box is being loaded the main portal screen appears Now Press the Setup button on...

How to connect my Mag box

You need to connect your box to the electrical grid via an external power supply, and then...

Message Your STB blocked, call the provider appears on the screen. What should I do?

The box receives this message from Us. Most often, the message can appear on the expiration of...

Message The firmware of the STB is outdated, please update it appears on the screen. What should I do?

The box receives this message from Us. In this case, please contact our technical support service.

After turning the power on my box, the device does not turn on or there is no picture on the TV screen.

Please make sure that LED on the box is lit and both devices (the box and TV) are connected to...